Monday, April 21, 2014

Purple trio earrings

Today was another rough day - I've had a really bad headache that just won't go away.  It's a little bit better than earlier, so I have hopes that in a few days I'll be my "normal" self again.

Instead of my usual "I feel like crap so I'm breaking out the One Step Looper for quick earrings", I decided to make some slightly more advanced earrings using wrapped loops.

Years and years ago I picked up these pretty purple glass beads with dainty roses in them.  They came in three shapes:


At first I had wanted to stack them with the cylinder on the bottom, the round one in the middle, and the teardrop on top.  I could do a wrapped loop for the bottom one, but the headpins I have aren't long enough for me to do wrapped loops on either end for the top and middle beads.  Instead of grabbing wire, I opted to stagger the lengths of the headpins:


That picture is a little dark, isn't it?  That was the best of about 15 pictures.  Argh.

I used 11/0 seed beads to add some color and to make sure that the longest headpins would be the same length and the medium-length headpins would be the same length.  If I had tried to eyeball it, the lengths would have been all over the place.

Sunday, April 20, 2014

This Easter Egg looks better

Happy Easter!

We had an eventful day today.  We went out to dinner with my mother and stepfather (John) at a nice, high-end restaurant.  Dinner was pleasant, but when we got to the car we found this:


The car on the right - the one perfectly within the yellow lines - is John's.  Let's look at that from the front, shall we?


Thank goodness for iPhone cameras, huh?

The restaurant called the police and finally found the owner.  She came out and said, "I don't remember doing anything like that.  What time did you get here?" like John would have somehow wedged his car up on hers then crawled through the passenger side to get out.  She maintained that she couldn't have done that without noticing (duh) and kept trying to figure out if she arrived before we did.  Anyway, the officer said it definitely looks like the woman was at fault, but she couldn't issue a citation because it happened on private property.  Ugh.  Information was exchanged, and insurance companies will be contacted.

The damage isn't extensive, but it's the principle of the thing.  Even if she hadn't noticed the hit, wouldn't she have noticed that she was way crooked and over the line as she walked behind her car to get to the restaurant?  I guess it's good she was dim - if she had just moved her car, we wouldn't have known what happened.

Now onto to a happier, if much shorter, topic...



After yesterday's debacle, I decided to stitch an Easter Egg I knew would look a lot better:


This is from my Tubed Key Holiday collection.  If I'd have thought about it, I could have stitched it yesterday so I could have worn it today.  Oh, well.  Now I have it for next year, or maybe I'll put it up for sale on Etsy when the time is right.

If you're interested in any of my Tubed Key tutorials (holiday or not) or kits, all of the information can be found here.

Saturday, April 19, 2014

Conceptual Easter egg

Happy day before Easter!  When I was trying to decide what to blog about (because I haven't finished the triangle bracelet yet), I wondered if I could come up with something Easter related.

I thought an Easter egg might be possible, so I started digging through my Super Duos.  I thought if I made Polka Dot beaded beads with cream on the ends and pastel blue in the middle, it might look like a partially dyed egg.  I started stitching, and with just the blue it didn't really look like an egg.  I added a stripe of purple and finished it up, and...


Hmm.  No.  Maybe if it was turned and on a different background?


Still no.  Steve said, "If you know it's an Easter egg, it looks like an Easter egg, but otherwise it doesn't."

I've left the thread on there because I'm not sure if I'm going to cut it apart or hang it from an earring wire.

One thing I learned is that using Delicas on the ends makes the openings too small to put a headpin through.

What do you think?  Post a comment here and tell me if it does or doesn't look like an Easter egg.  Its fate rests it your hands.


Friday, April 18, 2014

Review: "New" Fireline

When I first started stitching my friends told me that I should use fishing line - it's much stronger and easier to work with than beading thread for most applications.  At the time, the only fishing line I knew about was that clear stuff that's hard to knot - monofilament.  I bought some and stitched a spiral necklace using only seed beads with it.  It was a little hard to work with, but the resulting spiral had some body and firmness to it that I liked.

It didn't take long for me to find out that my friends were talking about a different fishing line, and I didn't let on that I had misunderstood.  Until now, that is.  I hope they don't tease me too badly.

The fishing line they were talking about was Fireline, which is made by Berkley.  The most common colors are Crystal (white) and Smoke (black).  I was hooked (no, I really didn't mean to make a fishing pun) from the first time I stitched with it.  Beading thread likes to fall out of my needle, and the resultant stitching doesn't feel very tight to me.  Fireline gave my pieces a nice firmness (without being too firm like the monofilament was), and I could tug on it really hard and not worry about it breaking.

Fireline is so strong that it dulls ordinary scissors, so I've recommended using Xuron's 9180 High Durability "Fireline" Scissors (you can see my review of them here).

I like Fireline so much I include it in all of my kits, and I have sold the Fireline Scissors at shows and online (I only have two left, but if you'd like order, e-mail me at traci@creative-pursuits.biz, and I'll order more!)

So life was blissfully happy until the Fireline started disappearing off of the shelves.  There was a nervous ripple around the beading community.  Then the rumors started that there was a new formula that was coming out.  Shortly after beaders got their hands on it, the chatter was about how the fisherpeople (we can't assume they're all men, you know) loved it, but the beaders hated it.  Today I tried to quickly find something online to support either the happy fisherpeople claim or the sad beader claim, but I was unsuccessful.  There is probably something somewhere, but I didn't want to spend the entire day looking.  I have enough problems with time slipping away from me as it is.

With all that in mind, I am going to give you my review.  Please keep in mind that this is my opinion and shouldn't be quoted as gospel.  I have worked with the new Fireline (6 lb. test) extensively for a few weeks.  Most of the time was with Smoke, but I have used Crystal a few times.

The first thing I noticed is that they changed the packaging.  The old spools were in boxes, and the new ones are sealed up like batteries:


I am happy with this decision.  I once bought some Fireline at Walmart, and if I hadn't glanced at the box's open window, I would have come home with some very thin monofilament.  It looked like someone had swapped the spools out and bought Fireline at monofilament prices.  The sticker had even been removed from the spool.  I brought the box and spool to an employee and requested it be removed from the shelf, but a few months later it was still up there.  I took the spool halfway out of the box and just laid it on the shelf in hopes that someone would notice it.

The next thing I noticed is that the spools are smaller:


On the surface this would seem to be a good thing - less waste and all that - but I liked to snap the spool into the cover of my beading Caboodle.  It kept it out of the way until I needed it.  The new one is much too small to do that.  Maybe I could rig something with magnets or Velcro, or (more likely) I can just deal with it.  People with the neat spool storage boxes (like this one) will have a lot of extra room inside.

Now onto the Fireline itself.  As I mentioned, most of my testing was with the Smoke color.  I do have a few thoughts about the Crystal color that I will share, but there will be no pictures.  I tried taking pictures with the Crystal, but I couldn't get a good enough contrast.

Right away the Fireline feels different.  The Crystal feels more twisted or bumpy, and the Smoke doesn't feel as smooth.  Here is a strand of the old and a strand of the new Smoke Fireline:



There is a bit of a twist to the old, but the twist in the new is more pronounced.  It also doesn't look quite as tightly twisted as the old.

At first when I started working with it I didn't notice a change.  I had to rip out some stitching, and I didn't see a problem.  However, I started having problems threading my needle.  I'd take the needle out to either weave in an end or to take something apart, and the end of the thread frayed a lot sooner than I'd have expected.

Today I did a test.  I took a needle and each piece of Fireline and threaded it and took the needle off five times.  I wasn't gentle with either the old or the new.  With the new, I started having trouble with the end fraying from the second threading.  That doesn't always happen - sometimes it slips right through, but once it starts fraying, the only recourse you have is to snip off probably 1/2" of the end and try it again.

It wasn't just the end that was frayed, though:


Do you see all the little hairs on the new one?  There's one on the old and a bunch on the new.  I started worrying about my beadwork and looked at the thread I have coming out of my triangle bracelet.  It's a relatively new thread, but it's been through one whole triangle unit, so it should show some signs of wear if normal beading would cause that.  The only spot that showed a problem was where the needle had been:


Other than that, I didn't see any loose hairs or anything else disturbing.

Fraying can also occur when ripping stitching out.  I've had a number of instances where I didn't have any problems, but it did happen one time with a new thread:


I had done a small amount of beadwork, realized I had screwed up, and I had to take it all apart.  I snipped an inch or so past this point in the thread and started up again.  This time I did it correctly (thank goodness).

I did the threading-needle test on the Crystal Fireline, too, and that seemed to fare better.  I didn't have any problems getting the needle threaded (maybe my aim was more accurate this time), and I didn't see much fraying, even though I was pretty rough on it.

So, is the new Fireline as good as the old Fireline?

Please send your hate mail to Steve - this was his idea

(I did beat that poor thread up pretty bad for that joke - you shouldn't have to worry about it fraying that much with normal beading practices.)

Even though the new Fireline isn't as good as the old one, I am not going to abandon ship.  I still like it a lot more than regular beading thread.  With the triangle bracelet I've been working on, I have pulled really hard on the thread on a number of occasions, and it hasn't snapped, so it seems as strong as before.

The big thing is the fraying.  My recommendations are:
  • Use shorter threads.  I'm not saying to use a foot at a time, but if you're like me and use two or more "wingspans" of thread because you hate adding new thread, you'll be putting undue stress on the thread as you're pulling it through lots and lots of beads lots and lots of times.
     
  • Don't reposition the needle too much.  This is going to be tough for me  - I start with a long thread and move the needle closer to the end as I go.  But we saw what that does to the thread, so it's probably best to work with a shorter tail.
     
  • If you have to rip out a lot of stitching, check the thread for frays.  It might be a good idea to check it from time to time anyway for big projects.  If the thread is frayed, weave it in and add a new piece that's free from frays.
Yes, this all sucks, but for those of us who love Fireline and nothing else, this is better than the alternative.  We can hope that one day they'll fix the problems, and we'll be in heaven again.

Thursday, April 17, 2014

Possible something possibly becoming a bracelet

If you're new here due to the "Xuron for Jewelers" newsletter, you may want to read yesterday's post.  I give a little introduction to my blog and list a few posts you might want to take a look at (three of them are reviews of Xuron tools).

Today I'm going back to the "Possible something" I've posted about a few times.  If you've missed it, you can catch up here, here, and here.  It's been slow going, but I think I'm getting somewhere.

I've added two triangles since I last showed it to you:


Here's how it looks on my wrist:



It is zigzagging when the curve is stretched out.  Since it's happening naturally, I don't think I have to do any stitching to force it.

Back to the bracelet/bangle debate...  The more I'm working with it, the more I think it won't work as a bangle.  It's not rigid enough to hold its shape.  It looks like it should be rigid, but it twists around between the triangles.  The piece as is curves around my wrist (yes, I do have a wrist, even though it doesn't look like it), so I don't think it would work as a loose piece.  I'm going to have to find someone with a smaller wrist and see how it looks.

The upshot of me abandoning the bangle aspect is that I'll have fewer triangles to stitch.  Yay!

Tomorrow I'll be posting my review of the new Fireline.  I won't write about this bracelet again until it's done or I've decided it doesn't work.  Let's hope it's the former - I really don't like wasting my time, but sometimes that's necessary when designing.

Wednesday, April 16, 2014

Bead-It-Forward assembly night at Kalmbach

Before we get to today's topic... if you're new to my blog through the "Xuron for Jewelers" newsletter, welcome!  (That doesn't sound very inclusive, does it?  If you're new but found me not through Xuron's newsletter, I'd like to welcome you, too!)  I'm very excited Xuron chose me to be their Featured Designer in their first newsletter!  Please pull up a chair and stay a while.

Like the newsletter says, I blog every day about my creative pursuits.  Many of my posts are about jewelry, but I also write about knitting, crocheting, cardmaking, scrapbooking, and some of the behind-the-scenes work I do to get ready for shows and classes.  I share what works, but I also discuss what doesn't work so you don't make the same mistakes I did.  From time to time I also write reviews about books, tools, yarn, my favorite Japanese restaurant, and my husband.  You may be interested in my reviews of a few Xuron tools: Fireline scissors, 4 in 1 crimper, and split ring pliers.  For the stitchers out there, check out my free instructions for my Waltz rope and Polka Dot beaded beads technique.

The newsletter also mentions that I'm teaching at the Bead&Button Show in June.  My Cobblestone Path bracelet class will be Friday, June 6, from 5:00p to 8:00p.  If you'd like to know more about me as a teacher and what all goes into my tutorials and kits, please read my Why you should take a class from Traci Otte blog post.  If you can't make it to the class but are going to the Meet the Teachers Reception (Wednesday, June 4), come by and say hi!

Whew!  That was a lot of introduction, but there's a lot that goes on around here.  If you'd like to be notified of what I'm posting every day, please like my Creative Pursuits Facebook page.  I rarely post more than the blog notification, so your news feed won't get flooded.

Back to our regularly scheduled programming...



For the last few years, Bead&Button Magazine has hosted Bead-It-Forward, a project that starts with beaded squares stitched by folks all over the world.  Those squares are assembled into a plethora of finished items, and those items are sold or auctioned off with all proceeds going directly to breast cancer research.  That's the extremely short version of the massive undertaking it has become.

The neat thing about this project (apart from it existing in the first place) is that each year there is a theme.  Last year it was flowers ("Stitching to find a bloomin’ cure"), and this year it is the ocean ("Turn the tide on breast cancer").  Bead&Button posted some patterns that people could stitch, but many people submitted their own designs.  Each square must be stitched onto a backing like Lacy's Stiff Stuff and meet other guidelines so all the squares have a cohesive look.

The deadline for this year was March 3rd.  That's when the fun (and hard work!) began.  The Bead&Button staff cataloged and organized the squares and decided which ones will be used for the different items they will have for sale: quilts, shadow boxes, cards, ornaments, and a few other items.  Last year there were a few notebooks that were really cute.  Once they divvied everything up, they made the ornaments.  They put two squares back to back and glued a ribbon so it can be hung.

Now that all that is done, they're hosting a few assembly events like I went to tonight.  I sat with other Loose Bead Society members and worked on ornaments.  Even though they're "made", they need to be finished.  Here's one of the ornaments before I got started:


My task was to add a beaded edging.  Apart from making the ornament prettier, the goal is to stitch through both backings so the ornaments don't fall apart.  The glue is strong, but it's best to stitch whenever possible.  For this ornament I added a three bead picot edge (you can learn how to do that here):


For the next ornament, I kept the same seed beads but switched techniques.  I used a beaded whip stitch (click here to learn how) for an ornament with a mermaid on one side and a starfish on the other:


That mermaid is a metal component that was stitched on.  It's gorgeous!

For my third ornament, I switched bead colors and went back to the picot:


I took pictures of a few of the other projects.  Here's a bead quilt in progress:


These quilts are obviously not for keeping yourself warm.  :)  I like that this one is all crabs.  It's interesting that the contributors used the same pattern but chose different colors.  It's like one of Andy Warhol's pieces, but quilted.

Here's a simple but elegant card:

 As I mentioned above, each of the finished items will be sold outright (the ornaments fit in this category, as there are so many of them) or auctioned off during the Bead&Button Show.  Last year the items were available right outside the marketplace fairly close to the Loose Bead Society table.  Hopefully it will be in the same spot so I won't have you wandering around aimlessly.  If all else fails, ask at the LBS table - they should be able to point you in the right direction.

There will be another assembly night in two weeks.  In that night's blog post I'll show you more ornaments that I stitched and some more quilts and other items.  If you're in the Milwaukee area and would like to pitch in, e-mail me at traci@creative-pursuits.biz, and I'll get you in touch with the right folks.


For 2015, the management of the Bead-It-Forward project is shifting to Amy Severino.  She has a website up with quite a lot of information about the project, including the project's history and guidelines for next year's theme: "Animals: Wild about finding a cure".  If you submit a square, please send me a picture, and I'll blog about it!

Tuesday, April 15, 2014

Captive Crystal earrings #2 - Black and red

Today will be another quick post.  After all my exploits yesterday, I'm in a fair amount of pain.  Some of it is expected after a full day with lots of activity.  On Once Upon a Time, they're fond of saying, "All magic comes with a price."  With Fibromyalgia, all activity comes with a price.  Something unexpected happened, though.  I have some pretty bad eye pain.  My working theory is that my friend's rambunctious one-year-old puppy accidentally kicked me in the eye while she was covering me with kisses.  I don't remember her doing it, but that doesn't mean it wasn't done.  At least part of the time my glasses were off (so they wouldn't get crushed), so it's very possible.  I don't think I need to go to the doctor.  It seems to be getting better, but it's been hurting to look at anything close up for very long.

Pair that with new beads that came in yesterday, and I have a new pair of Captive Crystal earrings to show you:


I need to get some black headpins for this - the silver ones stand out too much.  As before, the crystals don't show through very much when you're looking at the piece head-on.  Let's look at them from the side:


It's still pretty subtle.  When I ordered the beads, I think I messed up.  I bought Siam Thunder Polish crystal bicones, but I ordered the AB finish instead of the plain finish.  I remember thinking that I wanted plain, but I must have clicked the wrong thing.  The AB beads are beautiful, but I think the finish doesn't let the red of the crystals shine through as much as I'd hoped.  I did get some Dark Sapphire non-AB to go with Crystal AB Super Duos, but I might try them with the black ones to see if my guess about the AB finish is right.

Either way, I think these are pretty enough for me to make more components for a bracelet or necklace.  That will have to wait until the Possible Something is completed.

And now I must go rest my eye.  Even though these earrings are quick, I had to strain to see the black-on-black with black thread, and I have a bit of a headache.

The moral of today's blog is to not let puppies kick you in the face, even if they are cute and affectionate.