Kate is a good friend of mine, and she's been over to my house a time or two. She loved the decals I put up in our kitchen, so when the dentist she works for gave her leave to paint and decorate her room any way she wanted, she knew that she wanted to incorporate some decals in her decorating scheme.
She ordered the words "HAPPY", "SMILE", "BRUSH", "&", "FLOSS", and later she asked if I could cut "OPEN WIDE!" with whatever was left over (smaller than the others). I designed the decals on my Gypsy and sent her screen shots (taken with my phone) so she could approve them. For "HAPPY" and "SMILE", I added a flower.
Here's the cutting mat with "FLOSS" taken off:
The mats go to 24", so you can imagine just how big these decals are. I welded the letters so each word is in one piece. Oh - I should say that these decals were cut using my Cricut Expression.
Here's a cutting mat with the leftover vinyl removed:
This past weekend, Kate and her husband put up all the decorations - pictures and the decals.
After putting the transfer tape on the top of the word, here's Kate's husband (with an appropriate T-shirt on) holding "HAPPY" up on the wall so Kate can approve the positioning:
Kate then peeled off the decal's backing (the transfer tape is only sticky enough for positioning) and posed for the camera:
then she stuck the decal on the wall and burnished it:
That's to make sure that the decal has a firm hold on the wall. Here she is peeling off the transfer tape:
It's done and looks great!
Here are the other decals:
That "Tooth Fairy" picture to the right of "FLOSS" was drawn by Kate's daughter. She's so talented!
That's it! Oh, wait... where's "OPEN WIDE!"? Look up:
Just a gentle reminder of what you're supposed to do when sitting in that chair! :)
Kate said everyone loves her new room (including the decals)! I'm so happy I played a part in that.
If you'd like to do something similar to your office or a room in your home, contact me at traci@creative-pursuits.biz.
Showing posts with label gypsy. Show all posts
Showing posts with label gypsy. Show all posts
Tuesday, September 2, 2014
Saturday, April 26, 2014
First Communion card
One of Steve's relatives (a daughter of a cousin) is about to have her first Communion. We wanted to send her a card, but neither of us is Catholic or knows much about the first Communion traditions or rituals.
Fortunately I had a cross in one of my Cricut cartridges, so I cut a layered cross and put it on a lacy-punched background:
(Steve assures me that the right side is punched straight and that it looks slanted because of perspective.)
For the inside, I wanted to use a stamp from the Stampin' Up! Elegant Greetings set on a white background that we could also write on. However, when I put the rubber on the wooden block years ago, I put it on crooked. Argh. After a number of attempts at stamping it straight, I stamped it on a smaller piece of paper and ripped the edges. Steve had suggested trimming after stamping, but I couldn't figure out how to do that. He then suggested ripping the edges, and I thought that was a marvelous idea.
I also wanted to give her a little cross pendant I got from somewhere at some point in time. I don't know its origins. I thought this little girl would give it a good home. I attached it with a bit of wire, and she can easily take it off and put it on a pendant.
I swirled her name to protect her privacy. :)
It's going in the mail on Monday, and I hope she likes it!
Fortunately I had a cross in one of my Cricut cartridges, so I cut a layered cross and put it on a lacy-punched background:
(Steve assures me that the right side is punched straight and that it looks slanted because of perspective.)
For the inside, I wanted to use a stamp from the Stampin' Up! Elegant Greetings set on a white background that we could also write on. However, when I put the rubber on the wooden block years ago, I put it on crooked. Argh. After a number of attempts at stamping it straight, I stamped it on a smaller piece of paper and ripped the edges. Steve had suggested trimming after stamping, but I couldn't figure out how to do that. He then suggested ripping the edges, and I thought that was a marvelous idea.
I also wanted to give her a little cross pendant I got from somewhere at some point in time. I don't know its origins. I thought this little girl would give it a good home. I attached it with a bit of wire, and she can easily take it off and put it on a pendant.
I swirled her name to protect her privacy. :)
It's going in the mail on Monday, and I hope she likes it!
Monday, January 20, 2014
Sun vinyl decal
I named my blog "Mix Me Up!" because I like to dabble in a bunch of different crafts. That's also why I named my business "Creative Pursuits"; it doesn't tie me down to a specific product. In addition to finished jewelry, kits, and tutorials, I also sell vinyl decals and magnets. I use my Cricut to cut out the shapes, and for the decals I include transfer paper and instructions. I discussed this technique in the Our "new" kitchen post.
Yesterday I got an order for a yellow sun decal. I thought I had one cut, but I didn't. I knew I had very little yellow vinyl remaining, and I got nervous that it would be too small or that the cut wouldn't work. I have problems with that sometimes. I had two sheets about 3.5" x 3.75", and the sun is ~2" x 2". Another challenge was that one of the sheets had a small square cut out from when I made my decal board to show the shapes I carry and the available colors:
I used my Gypsy to plan out where the shape would go (click here if you'd like to see the Gypsy in action from when I put decals all over my toolbox). I found I could cut two suns out of the same sheet, which ties in beautifully with the time-saving technique I discussed yesterday.
Here's one of the suns and what the vinyl sheet looked like after cutting. The other is on its way to the customer:
If you're interested in any of the decals I offer, you can e-mail me at traci@creative-pursuits.biz for more information. Let me know which shape and which color, and I'll let you know how much it is (either $2 or $3 for the shapes shown above). If you'd like something else, let me know that, and I'll see if I can cut it for you.
Yesterday I got an order for a yellow sun decal. I thought I had one cut, but I didn't. I knew I had very little yellow vinyl remaining, and I got nervous that it would be too small or that the cut wouldn't work. I have problems with that sometimes. I had two sheets about 3.5" x 3.75", and the sun is ~2" x 2". Another challenge was that one of the sheets had a small square cut out from when I made my decal board to show the shapes I carry and the available colors:
I used my Gypsy to plan out where the shape would go (click here if you'd like to see the Gypsy in action from when I put decals all over my toolbox). I found I could cut two suns out of the same sheet, which ties in beautifully with the time-saving technique I discussed yesterday.
Here's one of the suns and what the vinyl sheet looked like after cutting. The other is on its way to the customer:
If you're interested in any of the decals I offer, you can e-mail me at traci@creative-pursuits.biz for more information. Let me know which shape and which color, and I'll let you know how much it is (either $2 or $3 for the shapes shown above). If you'd like something else, let me know that, and I'll see if I can cut it for you.
Tuesday, August 23, 2011
A study in opposites
Yeah, I blinked. TWO months have passed since I last wrote. How on earth did that happen? Well, I've been extremely busy, that's how. I submitted 6 classes for next year's Bead&Button Show, and I worked on some new products for my booth at Point's Fish Fry and a Flick. I also made some minor changes in my website. There's a calendar of events and a feed from my Facebook page. The website design information is still there but off in a separate section available from the main menu. More changes will be coming as I have time.
One big event that we did recently was the American Cancer Society's Relay for Life in Kenosha, Wisconsin on August 5th. When I heard that a custom team banner would cost around $90, I said, "I can do it for much less than that!" I also offered to create posterboards for the food we were selling.
I purchased a blank banner and some vinyl, and here's what I came up with for the team banner:
The width of the banner is 5 feet, and I think the height is around 3 feet. Here's where the study in opposites comes in. I put some of the beads I normally work with on the banner - not sewed on, just placed them on for picture taking.
Can't see them, can you? Let's try this:
How about now? No?
Ooh! There they are! The lighter ones are size 11/0 and the darker ones are 15/0. Now look back at the first picture. That gives you an idea of how different this project was than my usual work.
It was very awkward! Steve helped me - he needed to. Each word was far too long for me to work with on my own. I am proud of how the banner turned out, and our team captain, my Aunt Nancy of the "Nancy's Angels", cried out, "Oh, Traci!" She was pleased. Yay!
Here are the food posterboards I made:
I was very pleased with them, too! I used the Cricut and my Gypsy for all of this, of course. The pineapple and grapes were not in my shapes. I created the pineapple by modifying both parts of the strawberry - elongating each piece and even flipping the berry part. The grapes are a bunch of circles stacked on top of each other. The vine is from a different shape, and the highlights were added by Steve's X-Acto knife later. Yes, that is the correct spelling. My geeky husband just informed me of this. :)
Here are a few pictures from the event:
My Mom at the food table (I do have to say that our table looked much better than most of the others):
Steve high-fives my Aunt Nancy and Mom during the Survivors' walk:
And here is Steve starting his time on the track:
They had a number of activities throughout the evening. Steve took place in a cupcake eating contest. I thought for sure he would win, but see the girl to the left of the woman in green, the grass skirt, and the coconut boobs? Well, she won while Steve was still chewing the first cupcake. It was quite impressive!
Late at night, here's our team campsite:
I think that's about it! Our team has raised just over $3200, and the Kenosha event has raised over $300,00! Just a drop in the bucket, but every drop helps keep people alive!
One big event that we did recently was the American Cancer Society's Relay for Life in Kenosha, Wisconsin on August 5th. When I heard that a custom team banner would cost around $90, I said, "I can do it for much less than that!" I also offered to create posterboards for the food we were selling.
I purchased a blank banner and some vinyl, and here's what I came up with for the team banner:
The width of the banner is 5 feet, and I think the height is around 3 feet. Here's where the study in opposites comes in. I put some of the beads I normally work with on the banner - not sewed on, just placed them on for picture taking.
Can't see them, can you? Let's try this:
How about now? No?
Ooh! There they are! The lighter ones are size 11/0 and the darker ones are 15/0. Now look back at the first picture. That gives you an idea of how different this project was than my usual work.
It was very awkward! Steve helped me - he needed to. Each word was far too long for me to work with on my own. I am proud of how the banner turned out, and our team captain, my Aunt Nancy of the "Nancy's Angels", cried out, "Oh, Traci!" She was pleased. Yay!
Here are the food posterboards I made:
I was very pleased with them, too! I used the Cricut and my Gypsy for all of this, of course. The pineapple and grapes were not in my shapes. I created the pineapple by modifying both parts of the strawberry - elongating each piece and even flipping the berry part. The grapes are a bunch of circles stacked on top of each other. The vine is from a different shape, and the highlights were added by Steve's X-Acto knife later. Yes, that is the correct spelling. My geeky husband just informed me of this. :)
Here are a few pictures from the event:
My Mom at the food table (I do have to say that our table looked much better than most of the others):
Steve high-fives my Aunt Nancy and Mom during the Survivors' walk:
And here is Steve starting his time on the track:
They had a number of activities throughout the evening. Steve took place in a cupcake eating contest. I thought for sure he would win, but see the girl to the left of the woman in green, the grass skirt, and the coconut boobs? Well, she won while Steve was still chewing the first cupcake. It was quite impressive!
Late at night, here's our team campsite:
I think that's about it! Our team has raised just over $3200, and the Kenosha event has raised over $300,00! Just a drop in the bucket, but every drop helps keep people alive!
Friday, September 3, 2010
Our "new" kitchen!
It started well before Christmas, and it's all my Gypsy's fault. For those who don't remember or who are new to my blog, the Gypsy is a design tool for the Cricut cutting machine that lets you plan out what you want to cut before you cut it. I show it and my original Cricut (including a video!) in my A Gypsy-rific transformation blog post from June.
One of the benefits (or curses) of the Gypsy is that you can see all of the designs for all of the cartridges, not just the ones you own. I say it's a curse because the number of cartridges I now have is about 4 times as many as I had before I got my Gypsy. Now for the various mothers of mine who read this blog, we've found them cheap and/or on sale, so please don't fret. There are a number of Gypsy owners who have far more cartridges than I have because they go "exploring" in their Gypsy.
I'm (slightly) digressing. A few months before Christmas I was looking through the cartridges in my Gypsy and looked at "From My Kitchen". I love scrapping family recipes, so I'm interested in anything I can use for future pages. One of the features is a set of words relating to cooking such as "bake", "chill", "cut", etc... They're put together in fun way (as you'll see in a little bit), and I instantly knew what I wanted to do - decorate the soffit or fascia or whatever the hangy-out part of the wall is called. I showed my husband and explained what I wanted to do. He thought it was a good idea and got me the cartridge for Christmas.
Fast forward 8 months, and we finally got around to washing the walls (yuck!) and painting the kitchen. It was pretty boring and off-white, with curtains that had lots of little reddish flowers and leaves and vines and stuff. We were not going to change the floor (green and off-white), so we picked two shades of green paint - the dark one for the soffit/fascia/hangy-out part and the light one for the rest of the walls. We also found some easy-to-apply metal-ish sheets to use as a backsplash behind the stove. I purchased beige vinyl from ExpressionsVinyl.com, which has a lot of colors and is pretty cheap.
So, a few days after we finally finished painting and put up the new curtains (the old ones were dry clean only for goodness sake, and they were dusty and covered in cat fur from Katy sitting on the shelf all the time, so we pitched them), I set to work on the vinyl. I used the Gypsy and my new Expression (thanks again, Cyndy!) to maximize the size of the words and how many I could cut out of each sheet. To get the words up on the wall without making a mess out of everything I used transfer tape. It's still a little tricky, however.
The first step is cutting the words out on the Cricut, of course. You can set the blade depth and pressure to cut the vinyl and not all the way through the backing. That makes it much easier to remove the backing from the cutting mat. I thought I wrote those settings down, but I can't find them now. Practice first! Pressure was around the middle, and I think the blade depth was 4, but please don't quote me on it. I've used my Cricut since and changed the settings, so I can't look it up.
The next step is to take the backing off of the transfer tape and set it sticky side up on the table. This step can be a bit frustrating because, well, it's sticky. I ended up tucking a corner or two under to stick on the table. That helped.
Then, you take the vinyl (including the backing) off of the cutting mat and put it backing side up on the transfer tape. If you have multiple words or shapes on your mat, I recommend cutting them apart and working on one at a time. With the tongue-depressor-looking-thing you get with the vinyl or transfer tape (I'm not sure if you get it from ExpressionsVinyl.com, though) or with a bone folder or credit card, burnish the vinyl to make sure it sticks onto the transfer tape. Carefully peel off the backing. If the vinyl comes with, put the backing back and burnish some more. Then pick out the parts you don't need. I recommend getting off your butt and going downstairs to get your Cricut tool kit instead of just using the scissors you brought to separate the words. However, it can be done with just the scissors. The Cricut tools are easier, of course. You might want to practice first or make sure you have extra vinyl (I'll explain why later).
This is what you have when you're done and ready to put it on the wall:
If you're anal, you probably want to figure out the center of the wall where you want to put it, horizontally and vertically. With the playfulness of these words, I didn't want to do that. I wanted there to be some variation, and I'm just not that anal when it comes to stuff like this. About other things, yes, but not this.
Stick it on the wall and burnish it again:
Then very carefully peel up the transfer tape. If any of the vinyl comes with, put it back down and burnish again.
Before the big reveal....
One of the things we love about our house is its retro look. It was built in the 50's and looks it. There's light wood throughout and has lots of built-ins and cubbyholes. The kitchen phone is still a rotary phone. Steve wanted to replace it, but I thought it was too cute to remove. The "From My Kitchen" cartridge has a retro feel to it, so when I planned out what I wanted to cut out of the vinyl, I included a number of images to go along with the words. I could have used other cartridges, but I wanted to have everything "From My Kitchen".
However, images look better with more than one color, and I had only purchased beige and purple (Of course! One can never have too much purple vinyl). Steve had given me a lighter shade of purple and black vinyl, but none of those would go with the kitchen colors. In my "I don't even want to go downstairs to get my Cricut tool kit" laziness, I did not feel like driving 25-30 minutes to Brookfield to get another color of vinyl. I thought about where else I could get vinyl and remembered a sign store a block away on Appleton called Signs & Banners - Today!!. I called them, and they had vinyl! I walked over there after lunch and picked out a nice contrasting color. While chatting with Neal, the owner, we discussed the possibility of me working on his website. How cool is that?!
Armed with two colors, I now can cut and place images! Here's one view of the kitchen with a number of words and images:
You know I mentioned before that things can get tricky and that you should practice or get extra vinyl? That's supposed to be a strainer next to "strain":
I was going to piece together beige and brown so the beige would be prominent, but everything's so darned sticky, and I couldn't get it to lie right. I was out of beige, so I cut another strainer out of the brown, but it had to be smaller based on the brown I had left. Argh. I used the "holes" from the original beige strainer, and it looks okay, kind of, but I'm not that happy with it. I am going to get more beige and try again. I thought I had bought plenty of beige, but I would have been happy with 2 more sheets.
Back to the reveals. Almost everything indicates what that part of the kitchen holds. It's not complete, of course. That would look overloaded. Besides, there's not a "Kraft Mac 'n Cheese" shape in the cartridge. But I hit the basics.
Working around the kitchen to the left, next to the stove ("bake" and "cook") we have where the aprons are stored and a potholder (because I could not think of a thing from the cartridge that could go over the doorway to the rest of the house - anyone have any ideas?):
I think the apron's adorable:
Again - this is tricky because everything sticks to everything else. The lace isn't perfect, and the pockets could be straighter, but unless you're going to look closely like you are now, you don't really notice it much. I added the embellishments after it was on the wall - something else that's tricky, especially if you're short like I am.
Next to the doorway is the refrigerator, etc...
Yes, I labeled the clock. Isn't that a cute retro clock? It works with the rest of the kitchen so nicely! Next to the toaster oven:
Now visitors can find the dishes and the silverware and the phone (as if they could miss it!). Around the corner is the last of the vinyl:
The second color really makes a big difference!
One final picture for you - the other part of the kitchen with the new Katy-fur-resistant curtains and Miss Katy herself:
She'd really have to stretch to get her fur on those curtains!
All in all, even with the so-so strainer, I love the new look of the kitchen. Yes, just painting and getting new curtains would have looked nice, but the vinyl accents make a huge difference in making it OUR kitchen, not just A kitchen, if that makes sense.
Let me at the rest of the house!
One of the benefits (or curses) of the Gypsy is that you can see all of the designs for all of the cartridges, not just the ones you own. I say it's a curse because the number of cartridges I now have is about 4 times as many as I had before I got my Gypsy. Now for the various mothers of mine who read this blog, we've found them cheap and/or on sale, so please don't fret. There are a number of Gypsy owners who have far more cartridges than I have because they go "exploring" in their Gypsy.
I'm (slightly) digressing. A few months before Christmas I was looking through the cartridges in my Gypsy and looked at "From My Kitchen". I love scrapping family recipes, so I'm interested in anything I can use for future pages. One of the features is a set of words relating to cooking such as "bake", "chill", "cut", etc... They're put together in fun way (as you'll see in a little bit), and I instantly knew what I wanted to do - decorate the soffit or fascia or whatever the hangy-out part of the wall is called. I showed my husband and explained what I wanted to do. He thought it was a good idea and got me the cartridge for Christmas.
Fast forward 8 months, and we finally got around to washing the walls (yuck!) and painting the kitchen. It was pretty boring and off-white, with curtains that had lots of little reddish flowers and leaves and vines and stuff. We were not going to change the floor (green and off-white), so we picked two shades of green paint - the dark one for the soffit/fascia/hangy-out part and the light one for the rest of the walls. We also found some easy-to-apply metal-ish sheets to use as a backsplash behind the stove. I purchased beige vinyl from ExpressionsVinyl.com, which has a lot of colors and is pretty cheap.
So, a few days after we finally finished painting and put up the new curtains (the old ones were dry clean only for goodness sake, and they were dusty and covered in cat fur from Katy sitting on the shelf all the time, so we pitched them), I set to work on the vinyl. I used the Gypsy and my new Expression (thanks again, Cyndy!) to maximize the size of the words and how many I could cut out of each sheet. To get the words up on the wall without making a mess out of everything I used transfer tape. It's still a little tricky, however.
The first step is cutting the words out on the Cricut, of course. You can set the blade depth and pressure to cut the vinyl and not all the way through the backing. That makes it much easier to remove the backing from the cutting mat. I thought I wrote those settings down, but I can't find them now. Practice first! Pressure was around the middle, and I think the blade depth was 4, but please don't quote me on it. I've used my Cricut since and changed the settings, so I can't look it up.
The next step is to take the backing off of the transfer tape and set it sticky side up on the table. This step can be a bit frustrating because, well, it's sticky. I ended up tucking a corner or two under to stick on the table. That helped.
Then, you take the vinyl (including the backing) off of the cutting mat and put it backing side up on the transfer tape. If you have multiple words or shapes on your mat, I recommend cutting them apart and working on one at a time. With the tongue-depressor-looking-thing you get with the vinyl or transfer tape (I'm not sure if you get it from ExpressionsVinyl.com, though) or with a bone folder or credit card, burnish the vinyl to make sure it sticks onto the transfer tape. Carefully peel off the backing. If the vinyl comes with, put the backing back and burnish some more. Then pick out the parts you don't need. I recommend getting off your butt and going downstairs to get your Cricut tool kit instead of just using the scissors you brought to separate the words. However, it can be done with just the scissors. The Cricut tools are easier, of course. You might want to practice first or make sure you have extra vinyl (I'll explain why later).
This is what you have when you're done and ready to put it on the wall:
If you're anal, you probably want to figure out the center of the wall where you want to put it, horizontally and vertically. With the playfulness of these words, I didn't want to do that. I wanted there to be some variation, and I'm just not that anal when it comes to stuff like this. About other things, yes, but not this.
Stick it on the wall and burnish it again:
Then very carefully peel up the transfer tape. If any of the vinyl comes with, put it back down and burnish again.
Before the big reveal....
One of the things we love about our house is its retro look. It was built in the 50's and looks it. There's light wood throughout and has lots of built-ins and cubbyholes. The kitchen phone is still a rotary phone. Steve wanted to replace it, but I thought it was too cute to remove. The "From My Kitchen" cartridge has a retro feel to it, so when I planned out what I wanted to cut out of the vinyl, I included a number of images to go along with the words. I could have used other cartridges, but I wanted to have everything "From My Kitchen".
However, images look better with more than one color, and I had only purchased beige and purple (Of course! One can never have too much purple vinyl). Steve had given me a lighter shade of purple and black vinyl, but none of those would go with the kitchen colors. In my "I don't even want to go downstairs to get my Cricut tool kit" laziness, I did not feel like driving 25-30 minutes to Brookfield to get another color of vinyl. I thought about where else I could get vinyl and remembered a sign store a block away on Appleton called Signs & Banners - Today!!. I called them, and they had vinyl! I walked over there after lunch and picked out a nice contrasting color. While chatting with Neal, the owner, we discussed the possibility of me working on his website. How cool is that?!
Armed with two colors, I now can cut and place images! Here's one view of the kitchen with a number of words and images:
You know I mentioned before that things can get tricky and that you should practice or get extra vinyl? That's supposed to be a strainer next to "strain":
I was going to piece together beige and brown so the beige would be prominent, but everything's so darned sticky, and I couldn't get it to lie right. I was out of beige, so I cut another strainer out of the brown, but it had to be smaller based on the brown I had left. Argh. I used the "holes" from the original beige strainer, and it looks okay, kind of, but I'm not that happy with it. I am going to get more beige and try again. I thought I had bought plenty of beige, but I would have been happy with 2 more sheets.
Back to the reveals. Almost everything indicates what that part of the kitchen holds. It's not complete, of course. That would look overloaded. Besides, there's not a "Kraft Mac 'n Cheese" shape in the cartridge. But I hit the basics.
Working around the kitchen to the left, next to the stove ("bake" and "cook") we have where the aprons are stored and a potholder (because I could not think of a thing from the cartridge that could go over the doorway to the rest of the house - anyone have any ideas?):
I think the apron's adorable:
Again - this is tricky because everything sticks to everything else. The lace isn't perfect, and the pockets could be straighter, but unless you're going to look closely like you are now, you don't really notice it much. I added the embellishments after it was on the wall - something else that's tricky, especially if you're short like I am.
Next to the doorway is the refrigerator, etc...
Yes, I labeled the clock. Isn't that a cute retro clock? It works with the rest of the kitchen so nicely! Next to the toaster oven:
Now visitors can find the dishes and the silverware and the phone (as if they could miss it!). Around the corner is the last of the vinyl:
The second color really makes a big difference!
One final picture for you - the other part of the kitchen with the new Katy-fur-resistant curtains and Miss Katy herself:
She'd really have to stretch to get her fur on those curtains!
All in all, even with the so-so strainer, I love the new look of the kitchen. Yes, just painting and getting new curtains would have looked nice, but the vinyl accents make a huge difference in making it OUR kitchen, not just A kitchen, if that makes sense.
Let me at the rest of the house!
Tuesday, August 10, 2010
I still can't believe this...
Last Friday, during the Cricut Circle gathering in Pewaukee, Wisconsin, I reconnected with Cyndy and Fumiyo and a few other women I met the week before at CHA. Here's a picture of the three of us (Fumiyo is on the left, and Cyndy is on the right):
Shannon from Provo Craft gave away quite a number of items: cartridges, T-shirts, sweatshirts, and machines ("I don't want to take anything back with me!"). Cyndy won a Cricut Cake machine (a Cricut machine that will cut edible materials for cakes, cupcakes, cookies, etc...). The woman in front of us (I'm sorry - I don't remember your name!) had won a Cricut Expression (a Cricut cutter that will cut up to around 12" x 24" - the original machine that I have cuts up to around 6" x 12"). Cyndy already had a Cake, and the woman in front of us already had an Expression. They swapped machines. I won an "October 31st" cartridge, which is all Halloween stuff. Cyndy loves Halloween, so I gave it to her - I wouldn't use it very often.
Well..... Cyndy gave me her Expression! I protested, but she insisted. She said she already had one, and I didn't. I am completely baffled, but I'm thrilled! I did have to rearrange my craft room a little so I could leave the Expression set up away from my normal work area, but that gave me more room for another plastic 2-drawer cart.
Now that I know how to edit and upload videos, I recorded my "inaugural cut":
After I very carefully spatula-ed (yes, that's a technical term) the letters and shapes off of the mat, I finished my scrapbook layout on the hotel where Steve and I stayed during our trip to Chicago last October:
I think the page turned out quite well! I used Stone Script for the title and Heritage for the flourishes. Since I've been promoting hand-written journaling (see this blog post for my thoughts on this), Steve wrote out our thoughts on our hotel:
Okay, I added my own thought at the end there, and I used a Slick Writer to write on the front of one of the photos:
That's it for today. I'd like to thank Cyndy profusely for giving me such a generous gift! I can't wait until I have a chance to cut something really large.
Yes, I promised you a blooper reel. That will come tomorrow... I need some more time for editing.
Shannon from Provo Craft gave away quite a number of items: cartridges, T-shirts, sweatshirts, and machines ("I don't want to take anything back with me!"). Cyndy won a Cricut Cake machine (a Cricut machine that will cut edible materials for cakes, cupcakes, cookies, etc...). The woman in front of us (I'm sorry - I don't remember your name!) had won a Cricut Expression (a Cricut cutter that will cut up to around 12" x 24" - the original machine that I have cuts up to around 6" x 12"). Cyndy already had a Cake, and the woman in front of us already had an Expression. They swapped machines. I won an "October 31st" cartridge, which is all Halloween stuff. Cyndy loves Halloween, so I gave it to her - I wouldn't use it very often.
Well..... Cyndy gave me her Expression! I protested, but she insisted. She said she already had one, and I didn't. I am completely baffled, but I'm thrilled! I did have to rearrange my craft room a little so I could leave the Expression set up away from my normal work area, but that gave me more room for another plastic 2-drawer cart.
Now that I know how to edit and upload videos, I recorded my "inaugural cut":
After I very carefully spatula-ed (yes, that's a technical term) the letters and shapes off of the mat, I finished my scrapbook layout on the hotel where Steve and I stayed during our trip to Chicago last October:
I think the page turned out quite well! I used Stone Script for the title and Heritage for the flourishes. Since I've been promoting hand-written journaling (see this blog post for my thoughts on this), Steve wrote out our thoughts on our hotel:
Okay, I added my own thought at the end there, and I used a Slick Writer to write on the front of one of the photos:
That's it for today. I'd like to thank Cyndy profusely for giving me such a generous gift! I can't wait until I have a chance to cut something really large.
Yes, I promised you a blooper reel. That will come tomorrow... I need some more time for editing.
Wednesday, August 4, 2010
Cricut charms made with shrink plastic - Part 3
Here's the moment you've been waiting for... the actual shrinking! There will be a few pictures, but most of the content is in videos. I actually created a YouTube account for this!
Okay - to sum up where we are at this point: I created shapes to draw and cut on the Gypsy using the Hide/Contour feature. I hacked up my favorite pen to get the shapes drawn on the plastic, and I cut them out using the normal Cricut blade. Oh - one thing I didn't mention yesterday... since the plastic was thick, I had the Gypsy cut everything twice. On the cut screen, there is a way to say how many times you want the Cricut to cut each shape. I don't know if I needed to cut each twice, but it worked just fine. If it ain't broke, don't fix it! After that, I colored the charms with colored pencils.
I took all the charms to the kitchen and grabbed my embossing gun, teflon sheet, and chopsticks. Chopsticks? Yeah, chopsticks. The embossing gun gets very hot, and if you don't hold the charm down, it will fly away (see the videos for many, many examples of this). When I started heat embossing my stamped images, I found that a chopstick is perfect for holding things in place without burning your fingers. I'm sure there are fancy-schmancy tongs or something available for this, but a chopstick will work just fine. If you don't have chopsticks, now is a perfect time to get a Chinese (to quote Lily Allen) and ask them to give you some chopsticks. The Egg Foo Young at YaYa China is excellent.
Sorry... I'll stop drooling on the keyboard and show you the videos. This first one is a short video showing you how the plastic shrinks up:
Steve shot a number of videos while I was shrinking the charms, and it was quickly obvious that a blooper reel was needed. I can't help but giggle each time I watch it, and I hope it makes you smile, too. It is pretty long, so be warned that if you don't have a high speed Internet connection. Even if you do, it might take a while for it all to load.
Apart from the funny bits, you'll see some difficulties that can occur when shrinking plastic and even one or two that worked out quite well!
I also have a few pictures of the shrunken charms. This first one shows a number of them around an unshrunk one so you can see how much smaller they get (the final charms are about 45% of the original size, according to the package):
You can also see how the small parts with the holes get a little twisted, on the charm with the tree and the red one with "t". If the hole is more embedded into the charm, it works better.
The colors intensify nicely, but there can be a bit of smearing due to the heat or some little remnants of colored pencil that were brushed off of other charms (that you don't see until it's too late). They also don't necessarily end up completely flat. However, this is an artsy project, so that's okay. That's what I tell myself, anyway! There are no guarantees with shrink plastic. Okay, after that disclaimer, here are a few more pictures:
If you make any shrink plastic charms, I'd love to see them! E-mail pictures to traciotte@att.net, and I'll put them up on my blog.
Okay - to sum up where we are at this point: I created shapes to draw and cut on the Gypsy using the Hide/Contour feature. I hacked up my favorite pen to get the shapes drawn on the plastic, and I cut them out using the normal Cricut blade. Oh - one thing I didn't mention yesterday... since the plastic was thick, I had the Gypsy cut everything twice. On the cut screen, there is a way to say how many times you want the Cricut to cut each shape. I don't know if I needed to cut each twice, but it worked just fine. If it ain't broke, don't fix it! After that, I colored the charms with colored pencils.
I took all the charms to the kitchen and grabbed my embossing gun, teflon sheet, and chopsticks. Chopsticks? Yeah, chopsticks. The embossing gun gets very hot, and if you don't hold the charm down, it will fly away (see the videos for many, many examples of this). When I started heat embossing my stamped images, I found that a chopstick is perfect for holding things in place without burning your fingers. I'm sure there are fancy-schmancy tongs or something available for this, but a chopstick will work just fine. If you don't have chopsticks, now is a perfect time to get a Chinese (to quote Lily Allen) and ask them to give you some chopsticks. The Egg Foo Young at YaYa China is excellent.
Sorry... I'll stop drooling on the keyboard and show you the videos. This first one is a short video showing you how the plastic shrinks up:
Steve shot a number of videos while I was shrinking the charms, and it was quickly obvious that a blooper reel was needed. I can't help but giggle each time I watch it, and I hope it makes you smile, too. It is pretty long, so be warned that if you don't have a high speed Internet connection. Even if you do, it might take a while for it all to load.
Apart from the funny bits, you'll see some difficulties that can occur when shrinking plastic and even one or two that worked out quite well!
I also have a few pictures of the shrunken charms. This first one shows a number of them around an unshrunk one so you can see how much smaller they get (the final charms are about 45% of the original size, according to the package):
You can also see how the small parts with the holes get a little twisted, on the charm with the tree and the red one with "t". If the hole is more embedded into the charm, it works better.
The colors intensify nicely, but there can be a bit of smearing due to the heat or some little remnants of colored pencil that were brushed off of other charms (that you don't see until it's too late). They also don't necessarily end up completely flat. However, this is an artsy project, so that's okay. That's what I tell myself, anyway! There are no guarantees with shrink plastic. Okay, after that disclaimer, here are a few more pictures:
If you make any shrink plastic charms, I'd love to see them! E-mail pictures to traciotte@att.net, and I'll put them up on my blog.
Tuesday, August 3, 2010
Cricut charms made with shrink plastic - Part 2
Okay, after I figured out what I wanted to draw and what I wanted to cut, I got out my shrink plastic. I used PolyShrink canvas white. I don't know if they still make it - I've had this for a very long time. The thing to remember is that you have to sand the plastic before you can draw on it. They suggest a cross-hatch pattern. I could really tell a difference on the parts I didn't sand too well.
After sanding, I then had a dilemma... what to use to draw on it! The Cricut markers worked, but the lines were too thick, and the marker ran into the areas that were sanded. I shrunk it anyway to see how it looked, but it didn't look right. I then tried the QuicKutz Silhouette pens, which fit perfectly into the Cricut and are much thinner, but for some reason they didn't write. After one attempt where I took a Zig Writer and drew over the shapes, I decided that was too much work.
Then I thought, "Hey, a Slick Writer will write on anything, even this plastic! What if...."
I took my beloved black fine point Slick Writer down to the basement, grabbed my husband's saw, and...
Not too bad of a cut, even if Steve thinks it's a little jagged in spots. I cut the innards (yes, that's the technical term) with scissors, only getting a little ink on my hands, and I put the cap on the cut end. Here's a picture with the pen next to the Silhouette pen:
Length: good. Width: not so much. Next stop: packing tape!
Purty, ain't it? Toward the end of the process, I had to wrap it with more tape because it started to compress with all of the handling. With each set of charms, I drew then cut. If you take the mat out, there's a possibility that it won't go back in at the exact same point, so the cuts might be off.
For most of the charms, it worked like a, uh, charm. With the last three, though, I had some problems. The pen started to wriggle, and the cuts were off. I was finally able to get them all done, but not without some swearing and using an extra sheet of the shrink plastic. Steve said he could make a housing out of Styrene (a really thin plastic used in model railroading), so we might try that for the next time.
Here's the charms after they were all drawn and cut:
For any cartridge that was just a font with no shapes, I used a lowercase "t" for "Traci". On the back of each charm I used a purple Slick Writer pen to write the name of the cartridge in case anyone asked.
After coloring with colored pencils, this is what I had:
The colors don't look too bright now, but after shrinking they really intensify. I'll keep you in suspense on the shrinking until tomorrow...
After sanding, I then had a dilemma... what to use to draw on it! The Cricut markers worked, but the lines were too thick, and the marker ran into the areas that were sanded. I shrunk it anyway to see how it looked, but it didn't look right. I then tried the QuicKutz Silhouette pens, which fit perfectly into the Cricut and are much thinner, but for some reason they didn't write. After one attempt where I took a Zig Writer and drew over the shapes, I decided that was too much work.
Then I thought, "Hey, a Slick Writer will write on anything, even this plastic! What if...."
I took my beloved black fine point Slick Writer down to the basement, grabbed my husband's saw, and...
Not too bad of a cut, even if Steve thinks it's a little jagged in spots. I cut the innards (yes, that's the technical term) with scissors, only getting a little ink on my hands, and I put the cap on the cut end. Here's a picture with the pen next to the Silhouette pen:
Length: good. Width: not so much. Next stop: packing tape!
Purty, ain't it? Toward the end of the process, I had to wrap it with more tape because it started to compress with all of the handling. With each set of charms, I drew then cut. If you take the mat out, there's a possibility that it won't go back in at the exact same point, so the cuts might be off.
For most of the charms, it worked like a, uh, charm. With the last three, though, I had some problems. The pen started to wriggle, and the cuts were off. I was finally able to get them all done, but not without some swearing and using an extra sheet of the shrink plastic. Steve said he could make a housing out of Styrene (a really thin plastic used in model railroading), so we might try that for the next time.
Here's the charms after they were all drawn and cut:
For any cartridge that was just a font with no shapes, I used a lowercase "t" for "Traci". On the back of each charm I used a purple Slick Writer pen to write the name of the cartridge in case anyone asked.
After coloring with colored pencils, this is what I had:
The colors don't look too bright now, but after shrinking they really intensify. I'll keep you in suspense on the shrinking until tomorrow...
Monday, August 2, 2010
Cricut charms made with shrink plastic - Part 1
Before CHA, I made charms for each of my cartridges (and two for French Manor) out of shrink plastic and added them to the Cricut Circle charm bracelet. I got a lot of compliments on my charms, and I promised to show how I made them on my blog.
Because the process was fairly involved, I'm going to split it up into a few posts. I thought I'd give you a little break - my last few posts have been quite large!
For once I won't tease you and wait until Wednesday or later before I show you the final product. Here's the bracelet with the green Cricut Circle charm and my additions:
I used the original Cricut, my Gypsy design tool, and all of my cartridges. For the shapes that didn't have frames or circles, I used charms from Heritage. In hindsight, I would have chosen different shapes for some of the charms. I'll explain in a bit.
The following pictures show a few of the charms in design mode on the Gypsy. When I draw and cut, I always use page 1 for drawing and page 2 for cutting. That way I don't get too confused. I want to draw before cutting, so that makes some sense.
Here's page 1:
The "Time4Fun" is from Cuttin' Up, and its frame is from Heritage. The other shape is from French Manor. As I mentioned above, I would have chosen other frames for some of the charms. As you can see on the "Time4Fun" charm, the part for the hole is pretty small. It shrinks considerably, and this hole gets very small and easily breaks off. That has happened to a few charms already, and Steve drills a new little hole and files off the remnant of the original hole. Yes, I could do it myself, but he likes to feel needed. :)
In the above picture, the black parts will be drawn, and the gray will be ignored. I used the Hide/Contour feature on the Gypsy, something I thought I'd never use. I should have known I'd figure out a way to make it indispensable. With only the Heritage charm selected, clicking the Hide/Contour button displays this screen:
Each part of the shape can be selected, and you can click the button to hide or show it (the button says "SHOW" in this screen). The little hole is gray, which indicates it will be hidden. Those shapes I wanted to cut and not draw, and I wanted to draw the zig-zag line and not cut it, so on page 2, I reversed what was hidden/shown:
So in this screen, the black will be cut, and the gray will be ignored.
I think that's probably good for today. Check back tomorrow to see what I did to one of my favorite pens... That will make more sense tomorrow, I promise.
Because the process was fairly involved, I'm going to split it up into a few posts. I thought I'd give you a little break - my last few posts have been quite large!
For once I won't tease you and wait until Wednesday or later before I show you the final product. Here's the bracelet with the green Cricut Circle charm and my additions:
I used the original Cricut, my Gypsy design tool, and all of my cartridges. For the shapes that didn't have frames or circles, I used charms from Heritage. In hindsight, I would have chosen different shapes for some of the charms. I'll explain in a bit.
The following pictures show a few of the charms in design mode on the Gypsy. When I draw and cut, I always use page 1 for drawing and page 2 for cutting. That way I don't get too confused. I want to draw before cutting, so that makes some sense.
Here's page 1:
The "Time4Fun" is from Cuttin' Up, and its frame is from Heritage. The other shape is from French Manor. As I mentioned above, I would have chosen other frames for some of the charms. As you can see on the "Time4Fun" charm, the part for the hole is pretty small. It shrinks considerably, and this hole gets very small and easily breaks off. That has happened to a few charms already, and Steve drills a new little hole and files off the remnant of the original hole. Yes, I could do it myself, but he likes to feel needed. :)
In the above picture, the black parts will be drawn, and the gray will be ignored. I used the Hide/Contour feature on the Gypsy, something I thought I'd never use. I should have known I'd figure out a way to make it indispensable. With only the Heritage charm selected, clicking the Hide/Contour button displays this screen:
Each part of the shape can be selected, and you can click the button to hide or show it (the button says "SHOW" in this screen). The little hole is gray, which indicates it will be hidden. Those shapes I wanted to cut and not draw, and I wanted to draw the zig-zag line and not cut it, so on page 2, I reversed what was hidden/shown:
So in this screen, the black will be cut, and the gray will be ignored.
I think that's probably good for today. Check back tomorrow to see what I did to one of my favorite pens... That will make more sense tomorrow, I promise.
Subscribe to:
Posts (Atom)























